720 w planar transformer document 1217 document 1217 revised 07/14/15 1. inductance is measured at 300 khz, 1.0 vrms, 0 adc. 2. leakage inductance is for the primary, measured with the secondary shorted 3. electrical specifcations at 25c. refer to doc 362 soldering surface mount components before soldering. inductance leakage at 0 a 1 dcr max (mohms) inductance turns part number 30% (h) pri sec aux1 aux2 max (h) pri : sec : aux1 : aux2 output MA5519-AL 190.8 5.0 1.53 178 178 0.13 6 : 4 : 2 : 2 12 v, 60 a ? developed for texas instruments pmp9219 lm5045 based 720 w power converter ? designed to operate at 400 khz with 36 C 75 v input ? 1500 vrms, one minute isolation from primary to secondary windings ? listed as t2 on texas instruments bom-pmp9219 for ti 720 w full bridge dc/dc converter dimensions are in inches mm core material ferrite terminations matte tin over nickel over brass. weight 53.9 g ambient temperature C40c to +125c maximum part temperature +150c (ambient + temp rise) storage temperature component: C40c to +125c. tray packaging: C40c to +80c resistance to soldering heat max three 40 second refows at +260c, parts cooled to room temperature between cycles moisture sensitivity level (msl) 1 (unlimited foor life at <30c / 85% relative humidity) failures in time (fit) / mean time between failures (mtbf) 38 per billion hours / 26,315,789 hours, calculated per telcordia sr-332 packaging 16 per tray pcb washing tested to mil-std-202 method 215 plus an additional aqueous wash. see doc787_pcb_washing.pdf . MA5519-AL xxxx y 1.37 34,7 1.34 34,0 max max 2 15 1 16 8 11 9 10 1.16 29,46 0.45 11,43 0.60 15,24 0.36 9,14 0.54 13,71 recommended land p attern 0.110 2,79 ? 0.133 3,38 ? 0.133 3,38 ? c l (6) 2 15 1 16 8 11 9 10 2 1 8 9 11 10 15 16 pr is ec au x1 au x2 0.689 17,5 max 0.006 /0,15 0.009 0,229 min
|